This humidity controller contains one humidity sensor and two independent outputs. One output is for a humidifier and the other is for a dehumidifier. It can be used for processes like tobacco/herbal dehydration, sausage curing, etc. By using both humidifying and dehumidifying, the humidity ratio can be controlled at a specific value regardless of whether it is in dry or wet environments. This controller is a plug-n-play device. No extra wiring is needed for the humidifier or dehumidifier. Both humidifying and dehumidifying control modes contain simple on/off operation; they are similar to a mechanical humidistat but with much higher precision due to adjustable hysteresis band, precise sensor and digital read out. Two operating modes are available: Single-step mode and multi-step mode. For multi-step mode, this humidity control can be programmed to vary with time in up to 8 humidity-time steps covering up to 33 days.
This plug-n-play humidity controller is designed for high relative humidity (>85% RH) and condensing humidity environments, whereas a slight drop in temperature may cause condensation and could damage other humidity sensors. This controller equipped with one of the most robust humidity sensors on the market. It can be fully recovered even after being immersed in water.
For HD220-W, the complimentary smart phone app AuberSmart is available for free for both iOS and Android devices. Features: 1) Access the device remotely. 2) Easy to view and analyze the performance. 3) User-friendly interface. 4) An integrated solution. 5) Easy to configure Wi-Fi connection.
Power output limit: 15A, combined total power of the two output channels.
For its spec, please check its manual:
Instruction manual: https://goo.gl/rYkOpS
Supplementary manual for wifi model: https://goo.gl/NKtTGW
App for Android: https://goo.gl/QVjJzL
App for iOS: https://goo.gl/OZkU2Y
Make sure this fitsby entering your model number.
Controller measures and controls both humidity remotely.
Wi-Fi connection enabled (Setup Video https://youtu.be/JY213MhW8vM). Remotely monitor/control the device through AuberSmart app (iOS/Android).
Two independent on/off control outputs: one for humidifier, another for dehumidifier
Reliable sensor can be used in high humidity (>85% RH) and condensing environments.
Plug-n-play controller. No wiring is needed. Has high and low limit alarms. Build-in audio buzzer.